Kudela · Spain: Santa Rosalía
Back to the apartment
All guides
Tumble dryer above the washing machine in the apartment

Apartment guide

How to use the tumble dryer

The dryer is the upper appliance, above the washing machine. The most versatile choice is Eco, which takes about 2 hours 20 minutes.

Start drying↓
Dryer panel showing Eco and 2 hours 20 minutes

Recommended cycle

Eco · about 2 hr 20 min

Eco suits most everyday laundry. Load well-spun clothes, turn the dial to Eco and press Start/Pause.

Best everyday choice
1
Load well-spun laundry

Do not overload the drum and check clothing labels.

2
Select Eco

Turn the dial to Eco. The display shows an estimated time of 2:20.

3
Press Start/Pause

The button is on the right of the control panel.

Johnson dryer program dial

Panel translation

All dryer programs

Programs are grouped exactly as they appear around the dial.

Especial

Special

On the panelMeaning
Mi/Meu CicloMy Cycle
JeansJeans
R. de camaBedding
SportSportswear
Camisas/BlusasShirts and blouses
Tiempo/Tempo

Timed programs

On the panelMeaning
Calentar/AquecerWarm
Enfriar/ArrefecerCool
RefrescarRefresh
Algodón/Algodão

Cotton

On the panelMeaning
ExtraExtra Dry
EcoEco
Plancha/FerroIron Dry
Sintéticos

Synthetics

On the panelMeaning
DelicadoDelicates
MixMixed fabrics
ExtraExtra Dry
Seco Armario/Seco ArmárioCupboard Dry
Lana/Lã

Wool

On the panelMeaning
Lana/LãWool
Pull-out dryer water tank
E20

Important message

E20 means the water tank is full

The dryer collects condensed water in the pull-out tank at the upper left. Empty it when E20 appears.

  1. Pull the tank straight towards you.
  2. Empty all water into the sink.
  3. Push the empty tank fully back in and restart the dryer.

Every few drying cycles

Clean both filter stages

The filter catches lint and dust from clothes. It sits at the lower edge of the drum opening.

Removing the first dryer filter stage
1

Remove the filter

Open the door and lift the curved grey filter by its handle.

Open second dryer filter stage
2

Open the second stage

Unfold the filter, remove lint from both meshes and refit it when dry.

The dryer is ready

Check the filter after every load and clean both stages thoroughly every few cycles.